The following will help you identify i2O products and the software used for each device.
Part numbers beginning with ALGA. This is the most recent version of the i2O logger, the Logger 17 can be used independently or in conjunction with i2O PRV and Pump Control systems. Used with the Configurator for direct laptop connection via USB.
The 3P2F version of Logger 17 has an additional connector that enables it to connect to an APV and carry our PRV control. For this reason, it is known as "Control Logger".
Part numbers beginning with APLG. Used with the Configurator for direct laptop connection via USB (previously Field Service Utility).
Part numbers beginning with AECT. Used to Control the APV 09. Used with the Bluetooth Service application.
Part numbers beginning with AMPV. Currently used in conjunction with Controller 09. The APV is controlled with the Bluetooth Service Application via the Controller.
Part numbers beginning with AEPM. This is the latest version of the i2O Pump Controller. Used to provide a set point output to a VSD or PLC. Currently used with the Bluetooth Service Application
Currently used with Loggers.
Water Service Application
Allows connection to all 09 devices and Pump Controllers (Optimisers) via Bluetooth.
Field Service Utility
Superseded by Configurator in April 2017 and is no longer supported.